Marantz PM6004 - Manual (Page 16)

12
ENGLISH
Setting Auto standby mode
With the Auto standby mode ON, this unit will automatically enter the
Auto standby mode after about 30 continuous minutes of no
output
from the speakers or headphones.
SOURCE DIRECT
Press and hold for at least 5 seconds.
Auto standby mode is switched between On and Off.
Auto standby mode “Off”
Power indicator
Flashes once
Auto standby mode “On”
Power indicator
Flashes three times
NOTE
Perform the operation using the buttons on the unit. You cannot
perform the operation using
[SOURCE DIRECT] on the remote control.
• The default setting for the Auto standby mode is OFF.
• This unit will automatically enter Auto standby mode after about
continuous 30 minutes in the following conditions.
• No output from the selected input source.
• No operation performed on the remote control.
• No operation of
A/B>, ,
DIRECT> or .
1.PM6004_U_ENG_3rd.indd 12 2011/07/06 16:52:56