V p. 164) is set to “on, V p. 164) to “on, O hdmi control – Marantz NR1605 User Manual
Page 164: O pass through source
o HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On:
Use HDMI control function.
Off
(Default):
Do not use HDMI control function.
0 Please consult the operating instructions for each connected device to check
the settings.
0 Refer to “HDMI control function” for more information about the HDMI control
NOTE
If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
o Pass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
The most recently used input source will
go into standby mode.
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CD
z
(Default : CBL/SAT):
Pass through the selected input source.
z“Pass Through Source” can be set when any of the HDMI
connectors is assigned to “CD” for the input source in the “Input
“Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI
Pass Through” is set to “On”.
164