Marantz NR1504 - Manual (Page 76)

73
Pure Direct playback
This mode is for playback with higher sound quality than in “DIRECT”
mode, by turning off the front panel display panel, which can eliminate
faint low level noise from creeping into sensitive analog circuitry.
1
Play the selected device
( vpage 31 – 63 ).
2
Press PURE to select “PURE
DIRECT”.
PURE DIRECT indicator on the main
unit lights.
The display goes dark, and pure direct
playback begins.
• In DIRECT and PURE DIRECT listening modes, the following items
cannot be adjusted.
• Tone (
vpage 95 ) • M-DAX ( vpage 96 )
• MultEQ® ( vpage 97 ) • Dynamic EQ ( vpage 97 )
• Dynamic Volume ( vpage 97 )
• This can also be set by pressing PURE DIRECT on the main unit.
NOTE
• Video signals are only output when HDMI signals are played in the
PURE DIRECT mode.
• When in the PURE DIRECT mode, the menu screen is not displayed.
• When in the PURE DIRECT mode, the display turns off and appears
as if there is no electricity.
Selecting a listening mode
Auto surround playback
This mode detects the type of input digital signal, and automatically
selects the corresponding mode for playback.
1
Play the selected device
( vpage 31 – 63 ).
2
Press PURE to select “AUTO”.
Auto surround playback begins.
Basic instructions
Advanced instructions
Information
Basic instructions
DVD