Marantz NR1402 - Manual (Page 13)

7
ENGliSh DEutSch FRANçAiS itAliANo ESpAñol NEDERlANDS SVENSKA
Preparation
Playback
Setup Wizard
7
ENGliSh DEutSch FRANçAiS itAliANo ESpAñol NEDERlANDS SVENSKA
Playback (Basic operation)
Here, we explain how to perform simple operations.
For details, see the included CD-ROM (Owner’s manual).
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
Press the input source select button
( BD , DVD , SAT , TV , CD , TUNER or
M-XP ) twice to be played back.
When an input source select button ( BD , DVD ,
SAT , TV , CD , TUNER or M-XP ) is pressed
once, the unit switches to device selected
by the operating mode of the remote control.
If the input source select button is then
pressed again twice, the input source for the
unit is switched.
Select input source “AUX” to play back music from an audio system
connected to the AUX INPUT jack.
The input source “GAME” is selected to playback from a game device
connected to GAME connector of HDMI IN.
Select the input source “AUX” or “GAME” using one of the following
methods.
• “Source Select” menu
(“Using the “Source Select” menu” provided on the right)
• SOURCE d f button on the remote control unit
(“Using the SOURCE d f button on the remote control unit”
provided on the right)
• INPUT SELECTOR knob on the main unit
(“Using the knob on the main unit” provided on the right)
You can also use the following operation to select an input
source.
n Using the “Source Select” menu
Player
BD
DVD
CD
M-XPort
Video
SAT
TV
GAME
AUX
Tuner
TUNER
[ENTER] Enter [ ] Move
Source Select
The currently selected input
source is highlighted.
q Press .
Display the “Source Select” menu.
w Use uio p to select the input source,
then press ENTER .
The input source is set and the source
selection menu is turned off.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” ( vm page 59).
• To turn off the source selection menu without selecting an input
source, press again.
• When is pressed, the AMP-operation mode starts automatically
( vm page 68).
n Using the SOURCE d f button on the remote
control unit
Press SOURCE d or SOURCE f.
• Every time you press SOURCE d
or SOURCE f, the input source
switches in the following order.
DVD SAT BD
TUNER M-XPort
GAME
CD
AUX
TV
n Using the knob on the main unit
Turn INPUT SELECTOR .
• Every time you turn INPUT SELECTOR , the input source switches
in the following order.
DVD SAT BD
TUNER M-XPort
GAME
CD
AUX
TV
Selecting the input source