Marantz NR1402 - Manual (Page 10)

4
ENGliSh DEutSch FRANçAiS itAliANo ESpAñol NEDERlANDS SVENSKA
When preparations are complete, start the Setup Wizard.
Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the
instructions on the screen. You can skip or cancel at each section if necessary.
Setup Wizard
This completes the Setup Wizard.
Source Setup
[1/2]
BD
DVD
SAT
GAME
AUX
TV Please select device.
Source Setup
Set the connecting terminals for each
device to be set, and connect to the
terminals.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 64 “Input Assign”).
4
Speaker Calibration
Detect & Measure (Main)
Please connect
microphone.
Measure
MultEQ Speaker Calibration
Configure the settings for your speakers,
and for the optimum surround sound for
your room.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 11 “Set up speakers (Audyssey® Auto Setup)”).
3
Speaker Connection
Please select the
speaker configuration
to be used.
5.1ch
Others
5.1ch is the most
popular surround
system.
Speaker Connection
Connect the speakers for surround sound.
NOTE
Connections for speakers other than 5.1 channel
speakers cannot be set using the Setup Wizard.
Select “Others”, and then select “Skip” in “2. Speaker Connection” to proceed to “3. Speaker
Calibration”. (For details on the setting method, see
m page 29 “Speaker installation/connection
(Advanced)”.)
2
Language Select
English
Deutsch
Français
Please select the
language for the on
screen menu.
Language Select
Set the language for the instructions on
the television screen.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 61 “Language”).
1