DXG Technology DXG 552 - Manual (Page 26)

25
PC Cam
This digital camera can be used as a PC camera (webcam).
1. If you are running an operating system OTHER than Windows XP or 2000,
please follow the steps of “Driver Installation” to complete the installation
of the camera driver.
2. Press the power button to turn on the camera.
3. Press and hold the Mode Button and use the “Prev” or “Next” keys
“Prev” and “Next” to move to the bottom icon .
4. Press the Flash/Set Button and you will see “Mass Storage” and “PC Cam”
upon entering the menu screen.
5. Use the “Prev” or “Next” keys to move to “PC Cam” and press the Set key
to confirm storage.
6. Connect the USB cable to the camera and the PC when the USB
Connection diagram pops up on the screen.
7. You can now use the PC camera through the software that comes with the
CD-ROM or through the software available in Windows XP.