Lynx Studio LynxTWO Macintosh Mixer Addendum - Manual (Page 4)

Record Device Source Selection Button :
Controls routing of an input source to a recording
device. Each device can derive its source from any
one of the 40 available inputs.
{
{
Record Device Status
Playback Device Status
Activity Indicators : The device labels reflect the
name of the associated wave device.
For Record 1 to Record 8
For Play 1 to Play 8
Window Two - Record / Play Inputs and Routing
Selecting and monitoring the inputs to be sent to each of the LynxTWO’s Recording
and Playback Busses.
Pop-Up Menu : Gives you a the choice of all
available input options from which to choose.
Peak Meters : Displays the instantaneous level of
the audio being sent to the LynxTWO.
Mute : Enables mute function for each associated
input.
Dither : Enables dither for each associated input. The
Dither type is specified in the Settings menu.
Depth : Allows selection of the dither bit depth.
Options are Auto, 8-bit, 16-bit, 20-bit and 24-bit.
Auto allows the recording application to determine
the bit depth. 24-bit turns off dither.
Dropout : Shows the actual number of data dropouts
during recording or playback. Drop outs indicate
missed data and cause audio glitches. One dropout at
the end of playback is normal.
Sixteen
channels of
LStream Port
2 on internal
header. Maps
to 16 input
channels of
LS-ADAT or
8 channels of
LS-AES.