Dual XDVD9101 - Manual (Page 13)

XDVD9101 OPERATION
12
Control Locations and Functions - Monitor Open
Close Monitor
Screen Angle Up
Info/Picture
Screen Angle Down
Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the
monitor movement during the open/close sequence, or permanent damage could
occur.
Press to display DVD disc information in DVD mode. Holding this button for 3 seconds
brings up the Brightness setting, which can be adjusted by turning the rotary encoder
or by pressing the t or u buttons on the main remote control.
Press momentarily to adjust the angle of the screen upwards. Press and hold to slide
the monitor inwards.
Press to adjust the angle of the screen downwards. Press and hold to slide the
monitor outwards.
• The angle can also be manually selected via the screen setup menu.
• The color of the LCD monitor varies between viewing angles. Select the angle with
the most optimum view for your location.
• The last position of the monitor can be saved in memory. When “TFT Auto Open”
is set to "On" in the Main Setup menu, the monitor will return to its last position
automatically the next time the unit is turned on.
Close Monitor
Info/Picture
Screen Angle Up
Screen Angle Down
Monitor Notes
4 2
1
2
3
4
1
3