Dual XDVD9101 - Manual (Page 12)

11
Control Functions - Monitor Closed
Momentarily press PWR or any other button (except EJECT) to turn the unit on.
Press PWR for more than 3 seconds to turn the unit off.
Turn the rotary to adjust the volume level lower or higher (0-46). The current
volume level will be displayed on the secondary LCD when the monitor is
closed. Turning the rotary while the volume is muted will cancel the mute
function.
Press the volume knob momentarily to select between Flat, Classic, Pop, Rock
or User EQ presets.
• Due to its highly technological design, the XDVD9101 faceplate is NOT
removable. Do not attempt to remove the faceplate.
Upon installation, do not attempt to move the monitor by hand. Use the •
or buttons, the OPEN button on the front panel or the remote control.
The unit will stop if it encounters any obstacles during the open/close •
sequence. If this occurs, remove the obstacle and press OPEN again to
resume the monitor open/close sequence.
Power
Volume
EQ Presets
Caution
XDVD9101 OPERATION