Dacor Wall Oven User Manual

Page 4

Getting Started

Before using your oven, become familiar with

the features and control panel layout.

Below the oven mode touch pads are three

touch pads labeled “CANCEL•SECURE,”

“LIGHT” and “COOK TIME”. The

“CANCEL•SECURE” touch pad enables the

user to cancel the selection of an oven mode

or Delay Timed program, or disable the control

panel by pressing and holding the pad for

approximately three (3) seconds. Once the

control panel is in the “SECURE” mode, “OFF”

will be displayed on the clock. The “LIGHT”

touch pad turns the interior oven light “on”

and “off.” The “LIGHT” touch pad will remain

functional if the control panel has been disabled.

The “COOK TIME” touch pad is used to select

the length of time for a cooking process in Delay

Timed cooking mode.

Clock functions are selected by pressing the

touch pads located below the clock display

and oven mode touch pads. Oven functions

are chosen by pressing the touch pad for the

desired mode. Once a clock or oven function

has been chosen, a description of the selection

will flash in the clock display area.

IMPORTANT:

After choosing a clock function or oven

mode, you have six seconds to perform the

next programming step. If the next step is

not complete within six (6) seconds, the

program selection displayed on the clock

will disappear. Should this occur, just repeat

the initial function selection.

Oven Features

Epicure ECD227 and ECD230 Wall Oven Control Panel

Millennia MCD227 and MCD230 Wall Oven Control Panel

Epicure ECS227 and ECS230 Wall Oven Control Panel

Millennia MCS227 and MCs230 Wall Oven Control Panel