Lumens Technology PC192 - Manual (Page 35)

English - 34
7.21 I would like to resume the factory default setting
(Factory Reset)
1. Press [MENU] on the remote control or control panel to activate
the setting menu.
2. Press [
c], [d], [f], or [e] to select [Setting].
3. Press [ENTER] to activate.
4. Press [
f] or [e] to select [Advanced] menu.
5. Press [
d] to select [Factory Reset].
6. Press [
f] or [e] to select [Yes].
7. Press [ENTER] Execute Ζ
7.22 I would like to change the power on image
The power on image file must be less than 5 MB and in JPEG
format.
To save the file, please follow the instruction below:
File path: \DCIM\100MEDIA, for example: J: \DCIM\100MEDIA
File name: four English letters+ four numbers, for example: LUMN0001.JPG
1. Press [MENU] on the remote control or control panel to activate the
setting menu.
2. Press [
c], [d], [f], or [e] to select [Setting].
3. Press [ENTER] to activate.
4. Press [
f] or [e] to select [Advanced] menu.
5. Press [
d] to select [Splash Screen Settings].
6. Press [ENTER] to activate.
7. Press [
c] or [d] to select [Power On Image Setting] and press [f] or
[
e] to select [Default/Custom].
8. Press [
c] or [d] to select [Power On Logo Show time] and press [f]
or [
e] to set up the time.
9. Skip to Step 11 if your select [Default] in Step 7
10. Press [
c] or [d] to [Power On Image Select] and press [ENTER] to
read selected file.
11. ਊ[
d] to [Exit] and press [ENTER] to exit.
7.23 Computer-related functions
Ensure that the USB cable is connected and the drivers are installed
before using the computer-related functions. Refer to Chapter 4