Lumens Technology PC190 User Manual
Page 41
English - 40
react.
memory.
2. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to be
long. For the related setting, refer to
7.10 I would
like to capture images of Chapter 7 Descriptions
of major functions
.
8
The images
outputted from
PC190 are too
bright, dark or
vague.
Press [AUTO TUNE] to automatically adjust to the
optimal brightness and focal length.
9
Unable to record
images
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or internal
memory.
2. Please confirm the rotation angle. You may not able
to record when the image is rotated by 90°/270°.
10
The operating
steps in the
manual are not
applicable to the
machine.
The operating steps in the manual may be not applicable
to the machine due to improvement in functions.Check to
see if the Firmware version of your machine is up-to-date.
1
Please go to Lumens official website to check whether the
latest version is available for update.
http://www.Mylumens.com/goto.htm
2
The steps to check the FW version are as below:
2.1 Press [MENU] on the remote control or control panel
to enter the setting menu.
2.2 Press [] or [] to select [Advanced] menu.
If you are not sure whether it is the latest version, please
consult your dealer for advice.
11
How to release
the locked
machine
1. Press [Menu] on Remote Control or Control Panel
to enter the setting menu.
2. Press [] or [] to enter the [Advanced] menu.
3. Press [] to [Lock Down].
4. Press [] or [] to choose [Off], and cancel the
function of setting power-on password.
12
Only video
USB Audio is not supported in PC190. Therefore, the
Master:DHM025 Slave:DHO010
Firmware
version