Lumens Technology PC190 - Manual (Page 26)

English - 25
7.8 I would like to turn on/off the lamp
The default of the lamp is OFF. When using the remote control or control
panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to the [Lamp].
4. Press [] or [] to select [Off/Arm lamp/Both Lamps/Head lamp].
5. Press [MENU] to exit.
7.9 I would like to freeze images
1. Press [FREEZE] on the remote control to freeze the current image on
the screen. Press again to defreeze.
7.10 I would like to capture images
7.10.1 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
 You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [Capture] to start capturing continuously,
or press [Capture] again to exit.
 To change the quality of captured images, please refer to
7.10.2
Setting the quality of captured images .
 To change the settings of captured images, please refer to
7.10.3
Setting continuous capture .
7.10.2 Setting the quality of captured images
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.