Dixon 5000 Series - Manual (Page 47)

TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and conditions
of grass, cut height setting, engine RPM and ground speed are some of the variables that interact
creating differences in cut quality. Examination of one or more of t he above will generally
produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving
cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
Poor cut quality Un-level mower deck Consult your dealer
Poor cut quality Uneven tire pressures Check and adjust as required per
operators manual
SITUATION CAUSES REMEDY
Poor cut quality Ground speed Reduce mowing speed
Poor cut quality Incorrect engine to
mower deck belt Refer to page 42 for part numbers
Poor cut quality Engine RPM too low Increase engine RPM to maximum
Poor cut quality Dull or bent blade Sharpen or replace as required
Poor cut quality Grass buildup under
mower deck Clean out underside of mower deck
Poor cut quality Improper blades Replace with original equipment
blade designed for the 5000 Series
Models