beautypg.com

Care and maintenance – Dixon 5000 Series User Manual

Page 40

background image

CARE AND MAINTENANCE

MODELS ZTR 5501 & ZTR 5601 DRIVE SYSTEM ADJUSTMENTS

NEUTRAL ADJUSTMENT:

Swing upper control levers out into the neutral slots. Raise

upper body to the fully open po sition. Start engine and

disengage parking brake.

Caution should be used when releasing parking brake as mower may tend to creep or
move prior to adjustment.

If adjustment is required, loosen lock nuts at each end of the control rods and back off the
tension on each spring block.

Turn control rods in or out until neutral is obtained on each hydrostat.

Re-tighten lock nuts and tension bolts on spring blocks.

Page 37