Louroe Electronics DCS User Manual
Model dcs

DESCRIPTION
Model DCS is a Duress Call Station with a built-in panic button and a 3kHz oscillator mounted to the back side of a single
gang stainless steel electrical box (not supplied) for flush or surface mounting to a wall or flat surface.
When panic button is pressed, the DCS sends a 3kHz signal that alarms the Louroe sound activated base station. A
lighted LED on the base station identifies the zone in alarm. Model DCS is compatible only with the DG-12II and DG-
25III.
Model DCS can be connected directly to the above base stations or tied in with a Louroe Microphone (or
speaker/microphone) for providing one-way listen or two-way talk/listen with the base station.
MODEL DCS
REMOTE CALL STATION
INSTALLATION AND OPERATING INSTRUCTIONS
This type of audio system can be used in applications such as:
!
parking structures
!
stairwells
!
elevator lobbies
!
elevator cabs
!
secured entrances
!
detention centers
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
/ www.louroe.com
®
Page 1 of 4
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
dcs_inst_3/15
SPECIFICATIONS
Tone output
Supply voltage
Dimensions
3 Vrms @ 3 kHz
4 ½”x 2 3/4” W
Weight
2.5 oz
Shipping Weight
1 lb
12 Vdc