Louroe Electronics TLO-NM - Manual (Page 2)

CONNECTING TLO-NM TO A LOUROE BASE STATION
POSITIONING TLO-NM
Model TLO-NM is compatible with all Louroe audio base stations that feature two-way talk/listen communication. All
Louroe base stations contain terminal blocks for transmitting audio a speaker such as the TLO with 70V audio line.
For wiring and installation instructions, please refer to the specific Louroe Base Station being used.
After TLO-NM has been mounted to desired structure (wall, pole, etc.), horn should be tilted in a downward position.
Refer to the specific base station instructions for connections
Page 2 of 4
LOUROE ELECTRONICS™ 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818)
INSTALLATION AND OPERATING INSTRUCTIONS
1 2
1
2
3 5
6
7
To Louroe base station (SP and G) or AOP-SP70 (SP and C)
White = speaker (positive)
Black = speaker (negative)
BLACK
(GROUND)
POSITIVE GROUND
WHITE
(POSITIVE)
2 COND 18 GA CABLE
tlo-nm inst 3/15