Lacava 4282 - Manual (Page 5)

LACAVA LLC
®
Page 5 of 7
Installation Instructions for Vessel Sinks
1. For most above-counter sinks a
standard cutout of 4-6 inches will
work. The cutout has to be just
large enough so that the drain
assembly can be tightened
directly onto the porcelain.
2. Temporarily position the sink over
the cutout and make sure that it
is aligned properly, leaving
clearance for supply lines and
drain and faucet assemblies.
Make marks on the countertop
and sink as a guide for
installation.
3. Install the drain and faucet
assemblies onto the sink.
4. Turn the sink upside down and
apply a small bead of silicone
around the bottom edge of the
sink, following the instructions on
the label.
5. Place the sink onto the desired
location, aligning it with the
guide marks, and press down to
ensure a tight seal. Let the
sealant set, as stated in the
label’s instructions, and then
connect the supply lines and
drain pipes.