La Crosse Technology WS-9125 - Manual (Page 8)

8
is displayed user may proceed to the next step.
3. After the batteries are inserted, the Temperature Station will start
receiving data signal from the sensor. The outdoor temperature
should then be displayed on the Temperature Station. If this does
not happen after 2 minutes, the batteries will need to be removed
from both units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, there
should be a distance of no more than 330 feet between the final
position of the Temperature Station and the sensor (see notes on
“Positioning” and “915 MHz Reception”).