La Crosse Technology WS-9125 - Manual (Page 7)

7
SETTING UP:
When one sensor is used
1.
First, insert the batteries to the sensor (see “How to install and
replace batteries in the temperature sensor” below).
2. Within 30 seconds of powering up the sensor, insert the batteries
to the Temperature Station (see “How to install and replace
batteries in the Temperature Station” below). Once the
batteries are in place, all segments of the LCD will light up briefly.
Following the indoor temperature will be displayed. If this is not
shown in LCD after 60 seconds, remove the batteries and wait for
at least 60 seconds before reinserting them. Once the indoor data