D-Link AG DI-784 - Manual (Page 55)

55
Networking Basics
Assigning a Static IP Address
in Windows XP/2000
Input your IP address and
subnet mask. (The IP
Addresses on your network
must be within the same
range. For example, if one
computer has an IP
Address
of 192.168.0.2, the other
computers should have IP
Addresses that are
sequential, like 192.168.0.3
and 192.168.0.4. The
subnet mask must be the
same for all the computers
on the network.
The DNS server address will be supplied by your ISP (Internet Service Provider).
If the DNS Server address is not available from your ISP, you may input 192.168.0.1
in this field.
Click on Internet Protocol
(TCP/IP)
Click Properties
Click OK
Enter the IP Address
of the Default
Gateway (in this case
it is 192.168.0.1 for
the DI-7
84)
Input your DNS server
address.
Select Use the following
IP address in the Internet
Protocol (TCP/IP)
Properties window (shown
below)
192 168 0 1