Using the configuration menu (continued) – D-Link AG DI-784 User Manual

Page 32

Using the Configuration Menu (continued)

Advanced > Performance > 802.11a (Continued)

Super A Mode-

Super A is a group of performance enhancement features that

increase end user application throughput in an 802.11a network.

Super A is backwarsd compatible to standard 802.11a devices.

For top performance, all wirelss devices on the network should

be super A capable. Select either Disabled, Super A without Turbo,

Super A with Dynamic Turbo, or Super A with Static Turbo.

Disabled-

Standard 802.11a support, no enhanced capabilities.

Super A without
Turbo-

Capable of Packet Bursting, FastFrames, Compression, and no

Turbo mode.

Super A with
Dynamic Turbo-

Capable of Packet Bursting, FastFrames, Compression, and

Dynamic Turbo. This setting is backwards compatible with non-

Turbo (legacy) devices. Dynamic Turbo mode is only enabled

when all nodes on the wireless network is Super A with Dynamic

Turbo enabled.

Super A with
Static Turbo-

Capable of Packet Bursting, FastFrames, Compression, and

Static Turbo. This setting is not backwards compatible with non-

Turbo (legacy) devices. Static turbo mode is always on and is

only enabled when all nodes on the wireless network is Super A

with Static Turbo enabled.

Advanced > Performance > 802.11g

Wireless
Performance-

Select 802.11a or 802.11g.

802.11g is selected here. Dis-

played in this window are the

Wireless Performance fea-

tures for the Access Point por-

tion of the DI-784.

TX Rates-

Auto is the default selec-

tion. Select from the drop

down menu for your selec-

tion.

Full is the default selection. Select from the drop down menu for

your selection.

Transmit Power-

Beacon interval-

Beacons are packets sent by the DI-784 to synchronize a wire-

less network. Specify a value. 100 is the default setting and is

recommended.