La Crosse Technology 724-1710 - Manual (Page 8)

Model: 724-1710 www.lacrossetechnology.com/support Page | 8
Fahrenheit/Celsius
1. °F will flash.
2. Press and release the ▼ or ▲ buttons to select Fahrenheit or Celsius.
3. Confirm with the TIME SET button and exit the program menu.
Rainfall Unit of Measure (inches/millimeters)
Rainfall measurement can be in inches or millimeters. The cylinder graph will change
with the unit of measurement.
1. In (inches) will flash in the time display.
2. Press and release the ▲/CLEAR and ▼ buttons to select mm (millimeters).
3. Confirm with the SETTINGS button and exit.
Set Time Alarm
1. Press the SNOOZE button to view alarm time.
2. While in alarm mode, hold the SNOOZE button until rain station beeps, to enter alarm set
mode.
3. The alarm hour digit will flash in the time display.
4. Press and release the ▲/CLEAR and ▼ buttons to select the hour.
5. Press and release the SNOOZE button to set the minutes.
6. The minute digits will flash.
7. Press and release the ▲/CLEAR and ▼ buttons to select the minutes.
8. Confirm with the SNOOZE button and exit.
9. The bell icon will show indicating the alarm is active.
10.The bell icon will flash when the alarm is sounding.
Note: The rain station will default out of alarm set mode if no buttons are pressed for 20
seconds
.
Disarm Time Alarm
 The alarm automatically arms when the alarm is set.
 While viewing Alarm Time, press the SNOOZE button to disarm the time alarm.
 The bell icon will disappear.
Alarm Snooze
 When the alarm sounds, press the SNOOZE button to silence the alarm for 10 minutes.
 The snooze function may be repeated.
 Hold the SNOOZE to exit snooze mode.
 Press any other button to stop the alarm for one day.
Note: This station has a crescendo alarm that will sound for 2 minutes, then shut off completely.
Alarm Bell Icon