La Crosse Technology 724-1710 User Manual
Page 11
Model: 724-1710 www.lacrossetechnology.com/support Page | 11
Clear Rainfall Daily History Records
The 365 day rain history may remain during a battery change to the rain station.
The Current, 1 hour, 24 hour, 7 days, month and total rain will be erased.
To clear these records, after inserting batteries hold the
▲/CLEAR and ▼buttons together.
Rainfall Alert (24 hour)
The rain station offers a programmable 24 hour rainfall alert.
1. Press the ALERT button to enter Rain Alert Mode.
2. In Alert mode, hold the ALERT button until the rain station beeps, to enter set mode, for the
24 hour rainfall alert.
3. Press the ▲/CLEAR and ▼buttons to adjust the alert value.
4. Press the ALERT button to confirm and exit alert mode.
5. The rainfall alert is automatically armed when set.
Arm/Disarm 24 hour Rainfall Alert
Press the ALERT button to enter Rain Alert Mode.
In alert mode, press and release the ALERT button to arm or disarm the alert.
The alert bell icon will show when armed.
When the alert value is reached, the alarm will beep for 5 seconds, then once each
minute.
Press any button to stop the alert from sounding.
Search for Rainfall Sensor
Hold the RAIN button for 5 seconds to search for the rain sensor.
The strength signal icon will animate until the sensor signal is received or for 3 minutes if no
signal is available.
Note: The Time Alarm has priority over RF (radio frequency) reception, if alarm sounding is set
for during a search.