Kreg Jig R3 - Manual (Page 3)

800-447-8638 www.kregjig.com
Components Components
Clamp Pad Adapter:
This simple adapter snaps onto the back of the jig, allowing
Kreg Face Clamps to be attached for faster drilling and
superior repeatability.
Drill Guide:
This two-hole drill guide helps keep your drilling stroke
straight and true. Features 2 lifetime-guaranteed hardened
steel ‘cores.’
Easy-Press™ Positioning Sliders:
These two removable positioning sliders allow you to
compensate for workpiece thickness adjustments with a
simple press of your thumb.
Wood-Chip Release Holes:
Two holes at the base of each hardened steel core allow
wood chips to escape, easing the drill stroke and improving
the lifetime of your drill bit.
Mounting Hole:
For tight applications where a clamp won’t reach, the jig can
be secured to the workpiece using a wood screw through
this small hole.
Clamp Adapter Holes:
For high-speed repeatable applications, these two holes
secure the Clamp Pad Adapter in place for use with Kreg
Face Clamps.
Depth Collar | Allen Wrench:
The Depth Collar can be set at predetermined lengths along
the drill bit and locked in place with the Allen Wrench to set
the bit’s maximum plunge depth.
#2 Square Driver | 3/8” Stepped Drill Bit:
These two uniquely designed Kreg bits feature long-lasting
durable steel and are specialized for use with the
Kreg Jig ® and Kreg Joinery™.
A
A
B
B
C
C
D
D
E
F
F
G
G
H
H
E