Kreg Deck Jig - Manual (Page 3)

www.kregtool.com 800-447-8638 - [email protected]
Parts
Kreg Deck Jig ™
Deck Jig ™
The core of the system. Allows you to quickly and securely add deck boards to
your deck without visible fasteners.
6” Deck Jig ™ Drill Bit
This specialized stepped bit creates the unique shouldered hole in the deck board for
Kreg Deck Screws.
6” KTX Square Driver Bit
The KTX Square Head on this bit ensures optimal driver engagement while driving
your Deck Screws to the proper depth.
Spacer Rings
Three ¼” rings for standard spacing and three 5/16” rings for stock prone to excess
expansion allow quick deck-board spacing.
2” Deck Screws
100 screws 2”-long to get you started. All screws feature our Protec-Kote ™
rust-resistant coating, self-tapping tip, and KTX square drive.
Instructional DVD (Not shown)
Follow along as Master Carpenter Gary Streigler walks you through the basics, tips,
and tricks for using the Kreg Deck Jig™.
Stop Collars
Stop Collars for your drill and driver bits guarantee precise drilling depth and screw placement.
For non-grooved decking, use the gauges on the Deck Jig™ to correctly position them.
Allen Wrench
Use the wrench to lock the Stop Collars in the correct position on the drill and driver bits.
A
B
C
D
E
F
G
A
C
B
E
D
F
G
2-5/8” Deck Screws (Not included)
These longer screws are designed especially for fastening 1 ½”-thick deck boards
(2x4s and 2x6s).