KIP KIPFold 2000 - Manual (Page 23)

KIPFold 2000 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2013 KIP. All references subject to change without notice
- 22 -
9 Start-up and initialization errors
9:1 No contact while resetting FF or CF
9:2 Time-out while resetting FF
9:3 Time-out while resetting CF
9:4 No contact while initializing FF or CF
9:6 Time-out while initializing FF or CF
9:7 No contact while starting FF or CF
9:8 Timeout while starting FF or CF
9:9 Parameter transfer to FF or CF failed
9:10 Checking EEPROM in FF or CF failed
13 Printer messages
13:1 Printer sends an error and folder stops
Location 2: Fan Folder errors
22 Sensor errors on start-up
22:01 Sensor LB1 cut
22:02 Sensor LB2 cut
22:03 Sensor LB3 cut
22:04 Sensor LB4 cut
22:05 Sensor LB5 cut
22:06 Sensor LB0A cut
22:07 Sensor LB0B cut
22:08 Sensor LB8 cut
22:10 Encoder disc is not present at sensor LB7
26 Time out errors
26:01 No paper at sensor LB1
26:07 No paper at sensor LB0
26:08 No paper at sensor LB8
26:09 No paper at sensor LB4
26:40 No paper at sensor LB0A
28 License errors
28:01
License error Missing high speed license (speed is greater than 9.99 meter per
minute)