KIP KIPFold 2000 - Manual (Page 14)

KIPFold 2000 User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2013 KIP. All references subject to change without notice
- 13 -
Method 2
In this method files will be added to the job
ticket in the usual manner (Add Files,
Browse for and select files, add them to
the job to be printed). Once the files to be
printed have been added, using the
dropdown menu in the Fold column, ease
file can be given a different fold packet.
This method can be used when a job has
to be folded in a very specific way.
KIP PrintNet and Folding
When using the KIP PrintNet software there are two methods for printing using the KIPFold 2000.
Method 1
In this method the fold packet to be used will be selected first by clicking the Job Defaults button on the main
screen ribbon bar. This will open the Job Defaults screen. Once here select the desired Folder Packet setting to
be applied to the entire job. Doing this procedure prior to selecting the files to be printed will then apply the
selected fold packet to all selected files
making everything in the job ticket print
and fold the same way.