Kiddy Cruiserfix Pro - Manual (Page 19)

18
2. Open both left and right k-fix connectors (E)
by pressing the release mechanisms (N)
towards the front (past the green lock indicator
(O)) (Fig. 27).
3. When the connectors are open, the
booster car seat is detached from the lower
anchors.
4. Finally, the k-fix connectors (E) must be
retracted into the seat (J). Hold the release
button (L) (Fig. 28; Step 1) while pulling the
retraction tab (M) until the connectors are
completely inside the seat (Fig. 28; Step 2).
5. Let go of the release button (L) and then the
retraction tab (M).
8. Use on aircraft
This booster car seat is NOT certified for aircraft use.
Aircraft generally do not have a lap and shoulder belt as
required to use this booster car seat.
9. Removing and replacing the covers
ENG
Fig. 27
Fig. 28
• The covers are part of the safety design. Never use your booster car
seat without its original covers.
DEATH or SERIOUS INJURY can occur
WARNING
!