ZTE Blade V6 - Manual (Page 35)

35
Connect to a WPS Network
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to
add your phone to access points which support WPS.
You can use one of the following two methods to connect your
phone to a wireless network using WPS.
Method one: WPS button
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the > Advanced > WPS Push Button.
4. Press the WPS button on the access point and the access
point will recognize your phone and add it to the network.
Method two: PIN number
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the > Advanced > WPS Pin Entry.
4. The WPS Pin number displays on the screen. Enter the Pin
number into the access point’s setup page.
After entering the Pin number, your phone automatically finds the
access point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access