Vertex Standard VX-261 - Manual (Page 10)

8 VX-261 O
perating
M
anual
Belt.Clip.Installation.and.Removal
b
eFore
Y
ou
b
egin
r To install the Belt Clip: align the
Belt Clip to the groove of the Bat-
tery pack, then press the Belt Clip
downward until it locks in place
with a “Click.”
r To remove the Belt Clip: use a
flat head screw driver to press the
Belt Clip Tab away from the bat-
tery pack to unlock the Belt Clip,
then slide the Belt Clip upward to
remove it.
MIC/SP.CAP.Installation
r Use.only.the.supplied.screws.
when.install.the.MIC/SP cap.
r This.radio.does.not.keep.the.
Water.Resistant.Rating.(IP55).
when.the.MIC/SP.cap.is.not.in-
stalled.in.the.MIC/SP.jack.
Install the MIC/SP cap with the sup-
plied screws.
Belt Clip Tab