Kleenmaid KFL1506 12 programs - Manual (Page 4)

6
The washing assembly is secured with
two metal rods which protect
the machine during transport (fig.1).
• Undo the screws on the rear of the
machine (fig. 2).
• Remove the brackets, turn them over
and use them to pull the rods out (fig.
3).
• Lift the machine on one side and pick
up the parts which drop out (4
rubber hoses and 4 paper spools).
• Use the enclosed plastic caps to plug
the holes (fig. 4).
There is no need to pick them up, if you
have a model with sound insulation
and closed bottom. The items will fall
on the bottom of the washing machine
and will not effect the operation of the
machine.
Save the rods as you may need
them if you wish to move your
washing machine.
2. Removing the Transport Rods