Kleenmaid KFL1506 12 programs - Manual (Page 13)

15
Values stated in the table are measured
with test laundry and recommended
maximum load. During normal use,
deviation from stated value may occur.
On programmes with pre-wash (A and
F) water consumption is some 8 litres
higher.
Water consuption chart
Water
regulation Consumption in litres
non
delicate
(B-D)
permanent
press
(J-K)
Delicate
(L)
wool
(R)
1 49 35 50 35
2 60 45 50 35
3 70 55 60 55
4 80 65 68 70
5 90 80 80 70
Rinse Hold Pushbutton
This switch is used with
programmes for fine and
delicate laundry, if you want the
laundry to remain soaking in the last
rinsing water.
- We do not recommend using this
switch when washing woollens, as
woollens should be wrung
immediately after washing.
- When this switch is off, the washing
programme ends with spin cycle.
- If you want your programme to end
with pumping the water out of the
machine and no spinning
afterwards, simply turn the timer
knob to position M (pumping).
Gentle Tumbling
Pushbutton
Switching the "gentle tumbling"
switch will make the intensive
programmes less intensive and
suitable for washing delicate and less
soiled laundry.
Programmes for Resistant
Laundry
All these programmes have very
intensive tumbling, so that even heavy
stains are removed.
For lightly soiled laundry use the "gentle
tumbling" switch and turn the
programme into less intensive
programme.
Programmes for Permanent
press
These programmes are designed for
delicate laundry and for polyester-
cotton mixtures, requiring intensive
tumbling. Use the "gentle tumbling"
switch for very delicate laundry.
Tumbling will be less intensive and
there will be no intermediate spin
cycles.
Reduced Spinning Speed
Pushbutton
On all
programmes,
except on
programmes for woollens and delicates.
The spin speed can be reduced, by
switching the "reduced spinning speed"
switch.