Kleenmaid KFL1506 12 programs - Manual (Page 11)

13
Before washing, load the clothes,
detergent and conditioner, then select
the washing programme.
The control panel incorporates various
switches and pushbuttons for selecting
washing programmes, a control light,
and a dispenser.
Control Light
Control light is lit when the machine is
switched on.
Programme Selection Knob
This knob is used to select washing
programmes. All the 12 programmes
are marked from A to M. To select
various programmes, simply turn the
knob clockwise. Don't forget, when
turning the knob, the machine should be
switched off.
Washing programmes are divided into three
groups:
− A - E programmes for non-delicate
laundry;
− F - J programmes for Permanent press
and delicate laundry;
− K - M programmes for woollens.
Programmes for Non-delicates
These programmes are all very
intensive, with intermediate spinning
cycles after each rinsing cycle. During
final spinning (interval spinning), the
laundry is loosened after each interval,
so even if you choose higher number of
revolutions for spinning, the laundry
won't stick on the drum.
Programmes for Delicate and
Permanent press Laundry
All programmes from F to H are used
for intensive washing of delicate
laundry, using short in-between
spinning cycles (700 rpm max.) after
each rinsing and after final interval
spinning (1000 rpm max.).
- "Gentle tumbling and "higher water
level" settings are used to turn
normal programmes into
programmes for delicate laundry,
without in-between spinning.
Programmes end with delicate,
interval spinning.
- Program H is intended for washing
of delicate laundry, with gentle
"tumbling", without intermediate
spinning and with a short interval
final spin at 700 revs/min.
Programme for Woollens
This programme was especially
designed for washing woollens and very
delicate laundry made of other
materials (like silk underwear). Gentle
tumbling is used. The programme ends
with short spin cycle (max. 700 rpm).
7.Washing Machine Control Panel