beautypg.com

Earthing instructions, Warning – Kleenmaid LTK95 Installation Version 802116R1 User Manual

Page 16

background image

Installation

802116

14

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Earthing Instructions

The washer must be earthed. In the event of
malfunction or breakdown, earthing will reduce the
risk of electric shock by providing a path of least
resistance for electric current. The washer is equipped
with a cord having an equipment-earthing conductor
and a 3-prong earthing plug. The plug must be plugged
into an appropriate outlet that is properly installed and
earthed in accordance with all local codes and
ordinances.

DO NOT modify the plug provided with the washer –
if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.

NOTE: Have a qualified electrician check the
polarity of the wall receptacle. If a voltage reading
is measured other than that illustrated, the
qualified electrician should correct the problem.

If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the
manufacturer or its service agent.

Figure 16

DO NOT OPERATE OTHER APPLIANCES ON
THE SAME CIRCUIT. DO NOT OVERLOAD
CIRCUITS!

Do not operate both a washer and gas dryer on the
same circuit. Use separately fused 10 Amp circuits.

To reduce the risk of an electric shock or
fire, DO NOT use an extension cord or an
adapter to connect the washer to the
electric power source.

W082

WARNING

WARNING

Improper connection of the equipment-
earthing conductor can result in a risk of
electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the washer is properly
earthed.

W032

This unit is equipped with a three-prong
(earthing) plug for your protection against
shock hazard and should be plugged
directly into a properly earthed three-prong
receptacle. Do not cut or remove the
earthing prong from this plug.

W477

WARNING

FLW2069N

1

Power Cord

2

Earth (Ground) Prong

FLW2069N

1

2

240 VOLT

50 HERTZ

0 VOLT

240 VOLT

50 HERTZ

STANDARD 240 VOLT, 50 HERTZ, 3-WIRE

EFFECTIVELY EARTHED CIRCUIT

This manual is related to the following products: