Kleenmaid DW6011 - Manual (Page 15)

User instructions
13
EXTRA OPTIONS - “3/1” BUTTON
(available in all programs except the soak program)
Press buttons + (SPEED PROGRAMS button + HYGIENE option
button) simultaneously to activate the "3/1" option; the respective light
comes on to confirm the selection. The option is designed for use of
detergents which are complete with rinse aid, known on the market as "3
in 1", "triple action", etc. With this option activated, rinse aid will not be
used as the “3 in 1” detergents already contain rinse aid.
N.B.: even with the "3/1" option selected, rinse aid light will still stay on if
the containers is empty.
IMPORTANT: the option continues to be active until it is deactivated by
pressing buttons + simultaneously; the light will then go out.
3/1 products are not suitable for use with excessively hard water.
Therefore, if the water hardness is set higher than H3, the 3/1 OPTION
light (11) flashes to indicate a setting error. This does not prevent the
use of the option, but the washing results might not be of the best.
DELAYED START
(available in all programs except the soak program)
The start of the washing program can be delayed to program the
dishwasher to operate at the preferred time of day (e.g. overnight). Press
the PROGRAM DELAY button to activate the option and display (13)
a 1 hour delay. Keep pressing to select the delay required, which may be
up to 9, 12 or 24 hours depending on the model.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.