Kleenmaid TFG27PFXA - Manual (Page 13)

13
Under Refrigerator Behind Refrigerator
For most efficient operation,
you need to keep the area
under the refrigerator clean.
Turn the temperature control to
“0”. Remove the base grille.
Sweep away or vacuum dust
that is readily accessible on the
condenser coils, then turn the
control back on.
For best results, use a brush
specially designed for this
purpose, available at most
appliance parts stores. This
easy cleaning operation should
be done at least once a year.
Care should be taken in moving your refrigerator away from the wall.
All types of floor coverings can be damaged, particularly cushioned
coverings and those with embossed surfaces. Pull the refrigerator
straight out and return it to position by pushing it straight in. Moving
the refrigerator in a side direction may result in damage to the floor
covering or refrigerator.
When pushing the refrigerator back, make sure you don’t roll over the
power cord or icemaker supply line (on some models).
(continued next page)
Clean the condenser coils at
least once a year.
Fr
eezer Compar
tment
Car
e and Cleaning
Drawer Removal
Drawers will stop before coming all the way out of refrigerator to help
prevent contents from spilling onto floor. Drawers can easily be
removed by tilting up slightly and pulling past “stop” location.
On some models you may need to remove the door bins from the fresh
food door before removing the drawers.
If the door prevents you from taking out the drawers, the refrigerator
will need to be rolled forward until the door opens enough to slide the
drawers out. In some cases when you roll the refrigerator out you will
need to move the refrigerator to the left as you roll it out.
Drawer guides
Drawer guides
Left side Right side
When replacing the drawers, make sure you slide them through the
drawer guides on the right or left side (depending on your model).