beautypg.com

Before you call for service, Problem solution guide (continued) – Dacor DDWF24S User Manual

Page 20

background image

18

Before You Call for Service

Problem Solution Guide (Continued)

Problem

May Be Caused By

What to Do

Dishes are not clean

(cont.)

Cycle selected is too short

Select normal or heavy wash cycle.

Incorrect loading

Make sure dishes and flatware are loaded properly.

See Loading Your Dishwasher section. Make sure all

items are loaded securely and do not tip over.

Filter system clogged

Make sure filter system is clean and properly installed.

See page 12.

Detergent build-up in

dishwashing compartment

Pour a teaspoon to tablespoon of citric acid crystals

or white vinegar into the pre-wash compartment in

the detergent dispenser. Run a normal cycle with no

dishes.

Chucks of food left on

dishes or in dishwasher

compartment due to drain

outlet cover being removed

Check to make sure drain outlet cover is in place. See

page 14.

Whitish-blue sticky film

on dishes

To much rinse agent

See page 9 to change rinse agent dispenser setting.

Using liquid rinse agent

with a detergent that

already contains rinse

agent

Do not use rinse agent with detergent that contains

rinse agent or change detergent type.

Spotting and filming

Hard water/incorrect use of

dishwasher detergent

Use correct amount of dishwasher detergent or change

detergent type. See page 8.

NOTE: phosphate free

detergents do not work well with hard water.
You may need a home water softener.

No rinse agent

Make sure rinse agent dispenser is full.

Rinse agent dispenser not

set correctly

See page 9.

Too little water

Make sure water valve is fully open. Make sure that

water pressure is between 4.2 and 140 p.s.i. and flow

rate is a minimum of 3.0 gpm.

Spray arms do not rotate

properly

Make sure that both spray arms rotate freely. Make

sure that items do not obstruct movement of spray

arms. If necessary, clear any obstructions.
Make sure holes in spray arms are not blocked. If

necessary, clear holes with a pointed object and rinse

under water.

Strainer blocked

Check strainer. Clean if necessary.

Etching

Washing at too high a temperature and/or using too

much detergent can cause etching on (crystal) glass

(a permanent condition). To prevent damage, wash

(crystal) glass at “economy” temperature and dispense

dishwasher detergent according to page 8.