Kleenmaid OMF6012 - Manual (Page 15)

15
not block the cooking and does not switch off the oven, but
acts as a beeper. You can set it at any time, as a reminder
to check cooking on the hob, as well as the oven, or for other
cooking activities.
This can also be used with the oven switched off. In this case
all you have to do is touch the timer function symbol.
If you use it with the oven switched on, you must touch the time
function symbol three times in a row.
The dividing dots flash to indicate that it is possible to set the
value.
Set the minutes using the + and - symbols.
The count begins now. When the time indicated is up, the oven
will make a beeping sound and the special symbol will flash.
Press any button to interrupt the beeping sound.
Programming the timer: cancelling the programme
To cancel a programme, it is necessary to take the value
assigned previously to zero or switch off the oven.
Safety: oven switch-on lock
The control males a lock available on the console to prevent
the oven from being switched on or the cooking settings from
being interfered with.
It can be activated and deactivated at any time using the on/
off button.
3
3 sec.!!
Touch the on/off symbol for at least three seconds to activate
or deactivate, alternately, the oven lock.
Lock activated:
red padlock closed symbol on
the display Every action linked
to cooking is disabled.
Lock deactivated:
white padlock open symbol on
the display.
Replacing the oven light
IMPORTANT:
The oven light must have these precise features: a) it must be
able to resist high temperatures (up to 300°C)
b) power supply: see V/Hz indicated on data plate.
c) power 25W.
d) E 14 connection. Before proceeding, disconnect the
appliance from the main electricity supply.
- To prevent damage, place a tea cloth in the oven;
- unscrew the glass cover of the light;
- unscrew the old light bulb and replace it with the new one;
- put back the glass cover and remove the tea cloth;
- connect the appliance to the main electricity supply;