Kleenmaid CH40S - Manual (Page 9)

7
CONNECTIONS SCHEAMTIC
The hot plate is supplied with a power cable
(N2GMH2G types) prepared for 220...240V AC.
If the type of connections to which the hotplate is to be installed is other than
220 to 240 V Ac rmove the cable and make the connection according to the
adjacent drawings. (The cable must support temperatures of up to 120ºC).
The hotplate must be connected to the mains with a plug that meets the EEC
7 publication or with a multi-pole with a distance between the open contacts
of a least 3 mm.
This device conforms to European directives 73/23/Cee and 89/336/CEE
Total power
Hotplate: 60 cms., 6,3kW
PLATE
60 cms 27,5 A 32 A 220...240V~ 14 A 16 A 220...240V~
Three phase
∆
Voltage Tensión Protection Int.nominal
by phases
Protección Int.nominal
por fases
PLATE
60 cms 11 A 12 A 380...400V~ 16 A 20 A 380...400V~
Three phase
∆
Voltage Voltage Protection Int.nominal
by phases
Protection Int.nominal
by phases