Kleenmaid CH40S - Manual (Page 7)

5
INSTALLATION
Before the installation, please
check all measures of the
equipment and fit-in housing.
Cut out a piece of the worktop
following the instructions.
Equipment type “X” for fire
protection grade.
NOTE:
The worktop must be provided
with a shelf “A” so that the top
cannot be reached from inside,
due to the temperatures it
reaches.
Such shelf will be located once
the top has been fixed in the
worktop.
Place the hob face down on a
table, and after removing the
backing paper, affix the sealing
gasket all around the hob.
A: operating table
B: joint
C: Bottom cover
NOTE: DO NOT SILICONE SEAL THIS APPLIANCE TO THE WORK SURFACE.
150 Máx.