Kleenmaid CH17 - Manual (Page 9)

7
Hotplate blocking function.
The blocking of the hotplates prevent accidental changes while they are
operating. The initial selections are maintained and the indicators remain
active. The hotplates should be blocked to prevent children from operating
them or to prevent the effects of accidental contact with containers or tools.
Press the blocking sensor until its pilot light comes on.
Unblocking
Touch the blocking sensor until its pilot light switches off.
OPERATING
Double hotplate
The rear right sensors operate a small central circuit . To operate the
outer part, touch the double hotplate sensor until its pilot light comes
on. Switch off by touching the sensor until the pilot light switches off.
Focus hotplate - Model CH18
When the sensors for the rear left are operated, note that only its circular
circuit will operate. To switch on the outer part at the same time, touch the
source hotplate sensor 0 until its control point switches on.
To switch off the focus hotplate, touch the focus hotplate sensor 0 until
the control point switches off.