Kleenmaid CH17 - Manual (Page 10)

Automatic programming
9
.
(quick heating)
Each control area includes an automatic programming function.
This programming allows the corresponding maximum temperature to be
reached quickly and maintained automatically.
Selection.
Touch the sensor + once to turn on its decimal point, if it is in position
9.
the display will show
9.
Pre-selection is active for 10 seconds to allow the required power level to be
selected.
Touch the sensor - to reduce it to the required level (levels
3.
to
6.
are
recommended).
Once the automatic heating temperature is reached, a short warning will
sound and the decimal point will switch off. The hotplate will continue to
operate normally.
To cancel the automatic programming, touch the - sensor and the decimal
point will switch off.
OPERATING
8