Kleenmaid CH805CE-1 - Manual (Page 11)

172736
• Particular hotplate is switched off either by pressing the sensor
(-) to bring the heating power to “0”, or by simultaneously
pressing both the (+) and (-) sensor. Hotplate is switched
off automatically after the set timer period elapses. Display
indicates “0” for a short time, then the hotplate is switched off
and the indicator displays the remaining heat “H”.
• Immediately after a particular hotplate is switched off, or in
case the complete hob is switched off, the indicator shows
the letter “H” as a warning that the “hotplate is hot”. The
period of this warning signal is calculated in accordance with
the working time and the power setting of the hotplate. When
the warning signal is on do not touch the hotplate or place any
temperature sensitive objects on the relevant hotplate. Danger
of burns!
• When the indicator goes off, the hotplate surface is cool
enough to be touched safely.
• In case of mains interruption, the warning signal »H«
reappears when the power comes back, and remains
displayed until the calculated time from the last appearance
has expired. It is therefore possible that the “H” indication is
still on if the power failure took long time, although the hotplate
is completely cold, but it may also be still hot in case the power
failed for only a short period.
• The hob is switched off by pressing the main ON/OFF sensor.
The sound signal beeps and all indicators go off, except for
those hotplates which are still hot and display the warning “H”
sign as an indication of the remaining heat. When all hotplates
indicate power level “0”, or when this is the result of the preset
timer operation, the complete hob is switched off after a 10
second lapse, with only the remaining heat warning “H” still
illuminated.
11
Switching the hotplate
off
Remaining heat display
Switching the complete
hob off
172731_en.indd 11 172731_en.indd 11 9.1.2007 14:52:03 9.1.2007 14:52:03