Kleenmaid CH80X User Manual
Page 7
5
•
As a general rule, installation should be carried out by
qualified installers and technicians.
•
Before installation, make sure that local distribution
conditions (gas type and pressure) are compatible
with the appliance's adjustment.
•
This hob has been designed for use by private individuals
in a residential building. Adjustment conditions are noted
on a label enclosed in the wallet and attached to the
packaging.
•
As it is not connected to a device for the evacuation of
the products of combustion, it must be installed in
accordance with current regulations and used in a
well-ventilated location. Particular attention must be paid
to the regulations on ventilation.
•
Further to this, as combustion is only possible due to the
oxygen in air, this air must be constantly renewed and
the products of combustion must be evacuated (an air
flow of 2 m3/hr per kW of power is required).
P
P
a
a
r
r
t
t
2
2
:
:
F
F
o
o
r
r
t
t
h
h
e
e
i
i
n
n
s
s
t
t
a
a
l
l
l
l
e
e
r
r
General information
This hob is rated type X (under standard EN 60.335.2.6) insofar
as the heating of units is concerned.
Building in
Installation
TYPE :
N˚ SER. :
1
2
3
4
MANUFACTURED BY
Identification plate :
- 1 Serial number.
- 2 Appliance Type.
- 3 Operating voltage.
- 4 Total output.
Warning : keep this instruction book in a safe place near your
appliance with the identification label glued to the cover.