Kleenmaid CH80X User Manual
Page 4
2
P
P
a
a
r
r
t
t
1
1
:
:
F
F
o
o
r
r
t
t
h
h
e
e
u
u
s
s
e
e
r
r
Using the gas burners
•
Each burner is controlled by a tap with a safety locking
device which, in the event of accidental extinction of the
flame (spillage, draught...) quickly cuts off the gas supply
and prevents any from escaping.
A lower setting is achieved between the
symbol and
the
symbol. The dot (
●
) corresponds
to the off position for the knob.
•
Burner safety is effected by a metal rod located directly
adjacent to the flame.
•
Select the burner required, using the symbols located
near the control knobs as a guide.
•
To light a burner, push in the knob and turn it in the
direction to maximum setting.
Maintain pressure for a few seconds after the flame
has appeared, to engage the safety system.
•
In the event of a power cut, a burner can still be lit by pla-
cing a lighted match next to it while keeping the corres-
ponding control knob at maximum setting.
In the event of accidental extinction of the flame, just re-
light in the usual way, following the lighting instructions.
Ignition with gas safety device
NB:
the burner flames nearest to the tips of the pan sup-
port are smaller, to protect the enamel of the pan
support.