Kleenmaid CH311XFF - Manual (Page 14)

13
INSTALLATION INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting the appliance, make sure the supply voltage marked on the rating Plate
corresponds with the mains supply voltage.
WARNING – THIS APPLIANCE MUST BE EARTHED
Ensure the appliance is plugged into a 10amp GPO
IMPORTANT
The wires in the main supply lead are coloured in accordance with the following code:-
Green and Yellow - Earth
Blue - Neutral
Brown - Live
The connections must be made as follows:-
§ The wire coloured Green and Yellow must be connected to the terminal marked ‘E’ or the earth
symbol or coloured green and yellow.
§ The wire coloured Blue must be connected to the terminal marked ‘N’ or coloured blue or Black.
§ The wire coloured Brown must be connected to the terminal marked ‘L’ or coloured brown or red.
NOTE: The terminals marked ‘SUPPLY’ are for the mains supply wires and the terminations marked
‘LOAD’ are for the appliance wires.
The electrical outlet is to be positioned in an easily accessible position adjacent to the appliance.
In the event that it is necessary to replace the mains supply lead, the replacement must conform to the
specification listed in the Technical Data. Ensure that the colour code connection is correct and that all
screws are tightened correctly.