Kleenmaid CH311XFF - Manual (Page 10)

9
INSTALLATION INSTRUCTIONS
INSTALLATION NOTES
1. Cut the aperture to the dimensions shown below or use the template if printed on the packaging.
2. Invert the cooktop and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both sides. Do
not leave a gap in the sealing agent or overlap the thickness.
4.
NOTE: Do not use any Silicone based sealant, as this can damage the worktop surface if repairs
are required.
5. Insert the appliance into the aperture and fix in position via the clamps & screws, tightening the
screws evenly (see Fig 1 below).
6. Models CH311WOKFFand CH311XFF must be installed with the spacers that are attached to the
underside of the cooktop. If installed in a bench with an open cupboard, a dividing shelf must be
installed no nearer than 20mm to the underside of the unit which is identified by the spacers.
FIG 1
COOKTOP APERTURE DIMENSIONS
MODEL A B C D E
CH311XFF
510 288 494 270 50
CH311WOKFF
510 288 494 270 50
CH607X CH607W
500 580 480 560 50
CH609X CH609W
500 580 480 560 50
CH611XFF CH611WFF
510 620 480 560 50
CH711XFF
510 720 480 560 50
CH911XFF
510 909 480 840 50
CH915XFF CH915AFF
510 869 480 840 50
CH920XFF
510 909 480 840 50
Front of cooktop