Kemppi Minarc 110 - Manual (Page 4)

©
COPYRIGHT KEMPPI OY
4 – Minarc/0244
Mains voltage
Never take welding machine inside the piece you are working on (e.g. container or car).
Never set the welding machine on wet surface. Replace faulty cables immediately, they
create a danger to life and can cause a fi re. See that the connecting cable does not stick
nor touch sharp edges or a hot welding piece.
Welding current circuit
Isolate yourself from the welding current circuit by wearing dry and undamaged protec-
tive clothing. Never work on a wet surface. Never use damaged welding cables. Never
set electrode holder, earth clamp nor the welding cables on top of the power source or
other electric equipment.
Welding fumes
Ensure adequate ventilation. Always take special measures when welding metals con-
taining lead, cadmium, zinc, mercury or beryllium.
2. BEFORE YOU START USING THE UNIT
2.1. UNPACKING
The equipment is packed in durable, specially for them designed packages. Neverthe-
less, always before using the equipment to use, make certain it was not damaged during
transportation. Also check that you have received, what you ordered and that there
are instructions for it. NOTE the packaging material of the products is suitable for
recycling.
2.2. PLACING THE UNIT
Place the unit on level, solid and clean surface. Shield it from heavy rain and scorching
sun. Make certain cooling air circulates freely.
2.3. SERIAL NUMBER
Serial number of the unit is marked on the name plate on the unit. The serial number
makes it possible to trace product manufacturing series. You might need the serial
number placing spare parts orders or when planning maintenance .