Kemppi MagTrac F 61 - Manual (Page 5)

EN
1. INTRODUCTION
1.1 General
Congratulations on choosing the MagTrac F 61 equipment. Used correctly, Kemppi products
can significantly increase the productivity of your welding, and provide years of economical
service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specifications of the equipment can be found at the end
of the manual.
Please read the operating manual and the safety instructions booklet carefully before using
the equipment for the first time. For your own safety and that of your working environment,
pay particular attention to the safety instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
For Kemppi’s standard safety instructions and warranty terms and conditions, please visit our
web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the ’ NOTE! ’ notation. Read these sections carefully and follow
their instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2 About the product
MagTrac F 61 is a welding carriage for mechanisation of longitudinal MIG/MAG welding
applications. Used in combination with the high quality process control system of Kemppi
FastMig welding equipment, the MagTrac F 61 is an easy and efficient way of improving the
welding productivity and quality.
The MagTrac F 61 is equipped with Kemppi's unique welding gun quick-fixing mechanism
(patent pending), which makes it quick and easy to set up and adjust the carriage.
1.3 Operation safety
When using the carriage in applications where weakened magnetic force may pose a threat of
the carriage falling down, make sure that such possible accident can not cause any hazard to
people or equipment.
Read also the safety guide delivered in the MagTrac F 61 product package.
NOTE! Welding heat can little by little weaken the carriage's magnetic force.
1.4 Compatibility
MagTrac F 61 is compatible with the following welding equipment
• FastMig KMS 300 and 400 power sources
• FastMig Pulse 350 and 450 power sources
• MXF 65 wire feed unit
• Control panels SF 52W and SF 53W.
3
© Kemppi Oy / 1131